Weight placement question

Secrets, tips, tools, design considerations, materials, the "science" behind it all, and other topics related to building the cars and semi-trucks.
Speedster
Pine Head Legend
Pine Head Legend
Posts: 1725
Joined: Sat Feb 18, 2012 2:48 pm
Location: Toledo, Ohio

Re: Weight placement question

Post by Speedster » Sat Mar 16, 2019 12:52 pm

John, at this point I would buy Tundra 3/8" rod. Cut the amount you need to get to 5 ounces. Move the rod, starting from the back and move it up the hill starting from where there is enough wood to be able to drill a 25/64" hole in the side of the car. The only way you will be able to add more weight is to hollow out all the wood. Or, you could tape the rod on the top of the very back of the car and see what that gives you.



JohnSeever
Apprentice
Apprentice
Posts: 5
Joined: Tue Mar 05, 2019 11:00 pm
Location: Gower, MO

Re: Weight placement question

Post by JohnSeever » Sun Mar 17, 2019 6:37 am

thank you all.


John Seever
Bear Den Leader, Pack 30, Pony Express Council

Post Reply