Simple Green or Rejex
SG. user friendly, single coat,easy to apply, quick cure time.
Rejex, easily applied, long cure time, extra coats.
Anyone used either or both and results please
Polymer waxes are good if you don't want to pay for a bottle of Rejex. I have been using the same bottle of Rejex for about four years. Getting low. It is only used for PWD wheel preparation. Over 2000 sets of wheels and I see no need to change.
Shining Light Tribology
You have to know that your comment "We use Rejex in a totally different manner than the traditional process used by many racer." is going to be followed by questions. So, I'll start with how/in what way are you using Rejex?
Nosy Nosy! Trade Secret from an intellectual property approach. I will not patent this process. I opened my mouth about the make-up of my D-1 oil and I think that is enough free information for this time in point.
Our process is is tied to the upstream bore preparation processes that we also use. Each year we try to improve our bore processes that increase throughput efficiency and most important, increase the duration of the wheel spin with our proprietary spin test validation. All processes are validated through a Six Sigma approach.
Our process is successful because of many factors. I have been been working on PWD wheels what seems like forever. Economies of scale come into play. We have taken the same approach for the machined tread surface. We now have a machined thread surface that has a nicer overall appearance because of our continuous improvement efforts.
Use Rejex as you all traditionally use it and validate your wheel spin. You will be fast if you have an aligned car!
I have learned many things. When it comes to PWD it is not so much what you use, but how and how much you use. In other words, much like the best chocolate chip cookies and sweet potatoes I have ever had - it is not just the receipt - but the pan, gas vs electric, timing...
I haven't been around long enough to have ever had the fortune of using your D1. And, I don't trust what anyone else says is D1. So, I guess for now I'll hope you point me in the correct direction.
I know a few guys say they are about to run out of D1. Most are guessing they will either get slower or retire. If they can make their own D1 why would they be worried about it?
Also, if I get some do I use it by itself?
Add to bores just before race?
What is your experience with how long it will last open air?
Or, are wheels and axles installed using a vendor oil and then D]Galden HT-230 added just before race?
Should it be liberally applied?
There is also a rumor that you attempted again and the second "batch" was not the same. Some call it D2.
All the vendors think their oil is the best. Not sure what you want me to ask them other than that - as far as opinions go.
Pretty sure all of them have a little D1 around for special occasions. I can give you one example in a private setting.
I know I don't have any. And, if you are no longer selling or creating then it has to be one of the vendor products. Straight Krytox is not fast enough.
Gotta say that for the quantities and the strong desire for top racers and want to bes, from an MBA's perspective there appears to be more than a market for Murph's famous D!.
Who is online
Users browsing this forum: No registered users and 22 guests