Inspection night
Inspection night
Hello all,
I have a few question and comment. This year we had 2 cars that used non BSA wheels and one used the single piece axel. I think these are the Revell products but not sure. The wheels were mag style and did not have BSA markings. The parents both seemed clues as they thought these were BSA approved. To my eye these wheels and axels were not designed to better or faster, they just were not BSA. As these cars did not look competitive I let them through. What do others think. ( oh rules clearly state wheels and axels from the kit)
Also we adopted the district rules which requires the standard wheel length. Had one extended wheelbase that the dad was able to fix on the stop with a great attitude.
I let shorter wheelbases go as this was for a design aspect and not meant for speed in 2 cars. Thoughts here?
Finally the low point was a set of groove wheels where we allow "light sanding" only. Dad did not read the new rules. He was calm but said " this is why we are leaving scouting". I was very nice but it killed me to dq this dad. We offered to switch out wheels and he refused. Very sad.
Overall not too bad though.
Noskills
I have a few question and comment. This year we had 2 cars that used non BSA wheels and one used the single piece axel. I think these are the Revell products but not sure. The wheels were mag style and did not have BSA markings. The parents both seemed clues as they thought these were BSA approved. To my eye these wheels and axels were not designed to better or faster, they just were not BSA. As these cars did not look competitive I let them through. What do others think. ( oh rules clearly state wheels and axels from the kit)
Also we adopted the district rules which requires the standard wheel length. Had one extended wheelbase that the dad was able to fix on the stop with a great attitude.
I let shorter wheelbases go as this was for a design aspect and not meant for speed in 2 cars. Thoughts here?
Finally the low point was a set of groove wheels where we allow "light sanding" only. Dad did not read the new rules. He was calm but said " this is why we are leaving scouting". I was very nice but it killed me to dq this dad. We offered to switch out wheels and he refused. Very sad.
Overall not too bad though.
Noskills
"Nunchuk skills... bowhunting skills... pinewood derby skills... Girls only want boyfriends who have great skills!"
Napoleon Dynamite
Napoleon Dynamite
- Darin McGrew
- Pine Head Legend
- Posts: 1825
- Joined: Fri Jul 18, 2003 1:23 pm
- Location: Knoxville, TN
- Contact:
Re: Inspection night
We don't worry about whether the wheels are designed to be better or faster. If we see wheels that are not our wheels, then we hand them a new set (from our supply of spares) and send them to the pit table to switch the wheels and axles.Noskills wrote:This year we had 2 cars that used non BSA wheels and one used the single piece axel. I think these are the Revell products but not sure. The wheels were mag style and did not have BSA markings. The parents both seemed clues as they thought these were BSA approved. To my eye these wheels and axels were not designed to better or faster, they just were not BSA. As these cars did not look competitive I let them through. What do others think. ( oh rules clearly state wheels and axels from the kit)
We don't enforce the stock wheelbase. But if you're going to use a stock wheelbase rule, then I think you should enforce it for everyone.Noskills wrote:Also we adopted the district rules which requires the standard wheel length. Had one extended wheelbase that the dad was able to fix on the stop with a great attitude.
I let shorter wheelbases go as this was for a design aspect and not meant for speed in 2 cars. Thoughts here?
- FatSebastian
- Pine Head Legend
- Posts: 2818
- Joined: Wed Jun 17, 2009 2:49 pm
- Location: Boogerton, PA
Re: Inspection night
Pinecar? It incorporates the word "pine" like "Pinewood" and is often sold at hobby stores, sometimes right along side BSA stuff. I believe that one could get the two brands confused.Noskills wrote:This year we had 2 cars that used non BSA wheels and one used the single piece axle. [...] The wheels were mag style and did not have BSA markings.
Image courtesy of MaxV.
I doubt this would be his only reason; if they leave Scouting it will probably be because the son is not interested.Noskills wrote:He was calm but said "this is why we are leaving scouting".
Re: Inspection night
FS, yes they were Pinecar.
Thanks all for the advice. Perhaps next year I will choose a tougher person to be the inspector and I will take over in the pit crew where we will offer the new service of rapid wheel exchange
Seth
Thanks all for the advice. Perhaps next year I will choose a tougher person to be the inspector and I will take over in the pit crew where we will offer the new service of rapid wheel exchange
Seth
"Nunchuk skills... bowhunting skills... pinewood derby skills... Girls only want boyfriends who have great skills!"
Napoleon Dynamite
Napoleon Dynamite
- gpraceman
- Site Admin
- Posts: 4926
- Joined: Fri Jun 20, 2003 12:46 am
- Location: Highlands Ranch, CO
- Contact:
Re: Inspection night
I hate those little plastic axle end caps. They pop off and can be difficult to find on the floor.
Randy Lisano
Romans 5:8
Awana Grand Prix and Pinewood Derby racing - Where a child, an adult and a small block of wood combine for a lot of fun and memories.
Romans 5:8
Awana Grand Prix and Pinewood Derby racing - Where a child, an adult and a small block of wood combine for a lot of fun and memories.