Axle bender wanted

Here's a place for members to buy, sell, trade or list wanted supplies, tools, etc.. This is not a forum for commercial merchants to advertise in.
Post Reply
OOBigFish
Apprentice
Apprentice
Posts: 13
Joined: Sat Feb 15, 2020 12:51 am
Location: Bend, OR

Axle bender wanted

Post by OOBigFish »

Looking for an axle bender. If you have one let’s work out a deal.


Sent from my iPhone using Tapatalk
Speedster
Pine Head Legend
Pine Head Legend
Posts: 1972
Joined: Sat Feb 18, 2012 1:48 pm
Location: Toledo, Ohio

Re: Axle bender wanted

Post by Speedster »

Howdy OOBigFish
As far as I know, there are 2 commercially made axle benders.

1. Pro-Axle Press $17.95 and Pro-Rail rider tool $12.95 plus $7,95 shipping- Total $38.85. You would need both these pieces. They will bend a 1 1/2 or 2 1/2 angle
2, Pro-Axle Bender $79,95 plus $7.95 shipping - Total $87,90. They will bend any angle.

The cheapest way you can get the 2 pieces you need ( if you're lucky ) is to get them from Hobby Lobby with the 40% OFF the most expensive piece. That would cost about $24.00 for the 2 pieces. You might also be able to buy them from your Scout shop if you can't get them any other way.
OOBigFish
Apprentice
Apprentice
Posts: 13
Joined: Sat Feb 15, 2020 12:51 am
Location: Bend, OR

Re: Axle bender wanted

Post by OOBigFish »

Looking for the pro axle bender used.


Sent from my iPhone using Tapatalk
Speedster
Pine Head Legend
Pine Head Legend
Posts: 1972
Joined: Sat Feb 18, 2012 1:48 pm
Location: Toledo, Ohio

Re: Axle bender wanted

Post by Speedster »

That's a beautiful tool.
I wish you the Very Best.
Post Reply