Page 1 of 1

Need replacement switch for RaceMaster timer

Posted: Wed May 02, 2018 2:11 pm
by Anmarie
We have a four lane Grand Prix track with a RaceMaster timer, but our starter switcher thingy (sorry for the technical lingo) is not working. The small piece of metal that triggers the timer when the cars are sent down the track does not start the timer.

Any suggestions for a replacement part? Any help would be greatly appreciated.

Re: Need replacement switch for RaceMaster timer

Posted: Wed May 02, 2018 3:14 pm
by Vitamin K
Anmarie wrote: Wed May 02, 2018 2:11 pm We have a four lane Grand Prix track with a RaceMaster timer, but our starter switcher thingy (sorry for the technical lingo) is not working. The small piece of metal that triggers the timer when the cars are sent down the track does not start the timer.

Any suggestions for a replacement part? Any help would be greatly appreciated.
Maybe one of these?

Image

Re: Need replacement switch for RaceMaster timer

Posted: Wed May 02, 2018 6:15 pm
by gpraceman
This looks to be the correct part, Cherry E53-00R, but it looks to be obsolete. Not sure what a suitable replacement would be.

http://www.res-rich.com/cherrycorp/e51.htm

Image

Re: Need replacement switch for RaceMaster timer

Posted: Wed May 02, 2018 6:21 pm
by gpraceman
@Anmarie - When you move the whisker, do you hear a click?

Check the wires connected to the switch and make sure that they are firmly connected.

Check also wires going into the back end of the plug on the end of that cable. See if you have a loose or broken wire there.

Re: Need replacement switch for RaceMaster timer

Posted: Wed May 02, 2018 6:24 pm
by gpraceman
If the problem is a bad switch, then this part may be a suitable replacement, Omron D2MC01H. Though, it may be obsolete too.

https://www.alliedelec.com/omron-electr ... /70354065/

Re: Need replacement switch for RaceMaster timer

Posted: Wed May 02, 2018 9:27 pm
by Speedster
MicroWizard Timers has an RS Remote Start Switch and 50' of cable for $15.00. My switch closely resembles the one shown by Vitamin K. They state if you are ordering this switch for a previously purchased timer give them a call and tell them exactly what you have. You will need to have MicroWizard build the end with the fitting that plugs into your timer.

Re: Need replacement switch for RaceMaster timer

Posted: Wed May 02, 2018 11:50 pm
by gpraceman
Speedster wrote: Wed May 02, 2018 9:27 pm MicroWizard Timers has an RS Remote Start Switch and 50' of cable for $15.00. My switch closely resembles the one shown by Vitamin K. They state if you are ordering this switch for a previously purchased timer give them a call and tell them exactly what you have. You will need to have MicroWizard build the end with the fitting that plugs into your timer.
I'm not sure that MicroWizard will want to essentially repair some other manufacturer's timer.

Anyways, it is a bit more complicated that just dealing with a start switch. For a RaceMaster timer, the cable going to the start line services more than just the start switch. The power jack and a timer reset button are on the same bracket as the start switch.

Unfortunately, the owner of that company passed away and no one took over. The better option in the long run may be to purchase another brand of timer.

Need replacement switch for RaceMaster timer

Posted: Thu May 03, 2018 1:22 pm
by whodathunkit
Seems there is topic iv seen on DT
About the race master iv timer switch!

Best I can recall about the switch replacement
A highly well micro switch VT 16031C2
Or one from Allied..
D413-V3LD
SPDT; NO/NC; straight lever actuator;
Gold contacts 100ma; 250vac.




Sent from my iPhone using Tapatalk

Re: Need replacement switch for RaceMaster timer

Posted: Thu May 03, 2018 1:50 pm
by gpraceman
whodathunkit wrote: Thu May 03, 2018 1:22 pm Seems there is topic iv seen on DT
About the race master iv timer switch!

Best I can recall about the switch replacement
A highly well micro switch VT 16031C2
Or one from Allied..
D413-V3LD
SPDT; NO/NC; straight lever actuator;
Gold contacts 100ma; 250vac.
It looks like you are referring to this thread.

Re: Need replacement switch for RaceMaster timer

Posted: Thu May 03, 2018 1:53 pm
by whodathunkit
gpraceman wrote:It looks like you are referring to this thread.
Yes that's the topic I recall.. thanks Randy!


Sent from my iPhone using Tapatalk

Re: Need replacement switch for RaceMaster timer

Posted: Thu May 03, 2018 7:11 pm
by whodathunkit
gpraceman wrote: Wed May 02, 2018 6:15 pm This looks to be the correct part, Cherry E53-00R, but it looks to be obsolete. Not sure what a suitable replacement would be.

http://www.res-rich.com/cherrycorp/e51.htm

Image
:idk: maybe https://www.adafruit.com/product/820

Re: Need replacement switch for RaceMaster timer

Posted: Fri May 04, 2018 10:45 am
by gpraceman
whodathunkit wrote: Thu May 03, 2018 7:11 pm :idk: maybe https://www.adafruit.com/product/820
That looks like the best option yet. Not sure if mounting hole positions will line up with the bracket, but that is a minor issue.