Anyone Ever Used One Of These ?

General discussions for car and semi-truck racers.
Post Reply
Ratrodsrule1
Pine Head
Pine Head
Posts: 53
Joined: Mon Feb 17, 2020 7:30 pm
Location: Gulfport, MS

Anyone Ever Used One Of These ?

Post by Ratrodsrule1 » Sun Apr 05, 2020 11:11 am

If So what were the results and were you satisfied with the drill ? Thanks.......RRR
Never mind the link wouldn't work anyway. It was the orange plastic 3 degree rear cant drill guide from the Tread Mill Guy.......RRR



Eagle
Master Pine Head
Master Pine Head
Posts: 126
Joined: Mon Sep 24, 2018 5:03 pm
Location: Fresno, CA

Re: Anyone Ever Used One Of These ?

Post by Eagle » Sun Apr 05, 2020 12:09 pm

Something is better than nothing.
If you are wanting accuracy and ability to drill lots of cars for years to come you need a jig with drill bushings.

I recommend the clear jig the Micro makes.
You can purchase it on eBay.



Ratrodsrule1
Pine Head
Pine Head
Posts: 53
Joined: Mon Feb 17, 2020 7:30 pm
Location: Gulfport, MS

Re: Anyone Ever Used One Of These ?

Post by Ratrodsrule1 » Mon Apr 06, 2020 9:22 am

Thanks Eagle. after reading he claims will last 30/40 drills. Plastic made using 3D printer. Don't think I trust it. The Clear jig is great !!



Post Reply