1. Is it possible to treat hardened tungsten putty in some way to make it malleable again? I would hate to throw it out if so. (The putty in question probably originated from Maximum Velocity, in case an answer is formula-specific.)
2. Has anyone ever made their own tungsten putty using tungsten powder and some kind of binder? If so, what might be a long-lasting recipe? For example, I know it is possible to make Silly Putty by mixing starch with Elmer's Glue-All...
You have really picked a good one here to talk about that most of us probably don't even think about Un-tell it's way to late and we find it's un- malleable !
I have had the worst luck when using the Min wax brand wood putty on my derby car builds or woodworking project's
if it's one I have used in the past and then have let set on a shelf for a good long while.. it gets stiff and un-workable as well.
The Min wax wood putty is an oil base type putty.. I've found to soften it up to make it workable you can use a few things .
Like a little bit of Vaseline petroleum jelly (Or) a few drops of Granola vegetable oil (Or) a few drops of Baby oil..
by kneading it into the putty to make it malleable once more.
Maximum velocity- tungsten putty .. is a tungsten powder and a polymer mix of some type.
( if its a clay polymer type putty Vaseline or Baby oil will help to make it malleable once more .)
Have a Happy 4Th of July !
I double-checked and it is Pinewood Extreme brand, not Maximum Velocity. It is (or rather, was) a bit oily, but is now quite crumbly. The closest comparable material that I know of, based on odor and texture, is "sticky tack" or "poster tack". I have Vaseline and mineral oil available to me that I can try. Thanks for the suggestions!
Who is online
Users browsing this forum: No registered users and 12 guests